Lol, finally got this point. Will try to test in the real router. Appreciate for all the experts' reply and help.
2012/6/27 Gert Doering <[email protected]> > Hi, > > On Wed, Jun 27, 2012 at 12:09:10PM +0800, Xu Hu wrote: > > Since IPv6 Etherchannel cannot support for Cisco IOS so far, one of the > > solution is using the GRE tunnel sending traffic through port-channel, > > hence using the bandwidth. > > IPv6 on Etherchannels works perfectly well in general. Just on specific > combinations of hardware and line cards (AFAIR, GSR with some line cards) > it's not yet supported. > > > My IPv6 new deployment is dual-stack, since my IPv4 Etherchannel have > many > > sub-interface configuration and also the EVC configuration (Using ES+ > line > > card for Port-channel), now i am wondering how to configure such parts > when > > IPv6 is deploying. > > If you have an ES+ line card, you have 7600, and these have no restrictions > regarding IPv6 on channels. > > > Using sub-interface under Tunnel? > > Don't believe everything the "experts" say :-) > > gert > -- > USENET is *not* the non-clickable part of WWW! > // > www.muc.de/~gert/ > Gert Doering - Munich, Germany > [email protected] > fax: +49-89-35655025 > [email protected] > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
