Hi, This always comes up... Try adding this command mls nde sender
should be OK then... Ciao JC -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Anrey Teslenko Sent: Tuesday, July 03, 2012 12:19 PM To: [email protected] Subject: [c-nsp] Netflow + MPLS issue on PE routers Hello! We are exporting netlfow statistic from our PE routers (C7600). We use flow export v5. Netflow collector is Flow-capture. We observed that statistic which we exported are not correct. Too small amounts of traffic in statistic compared to the actual value PHP is disabled on PE routers (for some reason) so packages have MPLS header. We think this is main cause why we didn't receive properly statistics. But PHP must be disabled for us. My question is: What should we do to recive a correct statistic? Could we enable only flow export v9 to fix that? or maybe Could we enable only "ip flow egress" per downlink interfaces? If this possible for 7600. What are you think about "MPLS-aware NetFlow"? Could it to help us? Thanks in advance. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
