The AP is in Lightweight Access Point mode, it needs a controller in
order to be configured.
You need to change it into Autonomous mode in order to configure it via CLI.
In order to do this the AP software needs to be changed.
I can't find the cisco.com doc describing this process, but this can
point you in the right direction.
https://learningnetwork.cisco.com/thread/14405
On 7/6/2012 11:02 AM, Renelson Panosky wrote:
Good day
I am trying to configure an IP in this AP but some reason i can not get a
command prompt. It stucks at inatiated CLI...
Press RETURN to get started!
*Mar 1 00:00:05.765: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS
self test passed
*Mar 1 00:00:07.377: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS
self test passed on interface Dot11Radio 0
*Mar 1 00:00:08.976: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS
self test passed on interface Dot11Radio 1
*Mar 1 00:00:09.065: %LWAPP-3-CLIENTEVENTLOG: Unable to open event log
file flash:/event.log
*Mar 1 00:00:09.066: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP
event log (contains, 0 messages)
*Mar 1 00:00:09.119: AP identified to be in Huck Jr/1240/1130 configuration
*Mar 1 00:00:11.309: %LINK-3-UPDOWN: Interface FastEthernet0, changed
state to up
*Mar 1 00:00:11.373: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(21a)JA2,
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Mon 02-Nov-09 18:20 by prod_rel_team
*Mar 1 00:00:11.374: %SNMP-5-COLDSTART: SNMP agent on host
AP70ca.9bd9.d590 is undergoing a cold start
*Dec 6 19:19:46.045: Warning: Failed to run startup script
*Dec 6 19:19:46.072: %MESH-6-BVI_CREATED: Mesh BVI1 interface created
*Dec 6 19:19:46.093: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Dec 6 19:19:46.105: %LINK-5-CHANGED: Interface Dot11Radio1, changed state
to reset
*Dec 6 19:19:46.105: %LINK-5-CHANGED: Interface Dot11Radio0, changed state
to reset
*Dec 6 19:19:46.321: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Dec 6 19:19:46.655: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline
power source
*Dec 6 19:19:46.925: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0, changed state to down
*Dec 6 19:19:47.097: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state
to up
*Dec 6 19:19:47.109: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Dot11Radio1, changed state to up
*Dec 6 19:19:47.109: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Dot11Radio0, changed state to down
*Dec 6 19:19:47.531: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state
to up
*Dec 6 19:19:48.077: %LINK-3-UPDOWN: Interface BVI1, changed state to down
*Dec 6 19:19:48.537: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Dot11Radio0, changed state to up
flash:/mesh_start_cfg.txt: No such file or directoryThe filesystem
containing the variables may not be initialized yet.
*Dec 6 19:20:01.069: No Mesh startup file found
*Dec 6 19:20:04.812: %MESH-6-ADJACENCY_STATE_MACHINE_STARTED: Mesh
adjacency state machine started
*Dec 6 19:20:04.813: %LINK-5-CHANGED: Interface Dot11Radio1, changed state
to reset
*Dec 6 19:20:04.840: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state
to up
*Dec 6 19:20:04.841: %LINK-5-CHANGED: Interface Dot11Radio0, changed state
to reset
*Dec 6 19:20:04.870: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state
to up
*Dec 6 19:20:04.870: %LINK-5-CHANGED: Interface Dot11Radio1, changed state
to reset
*Dec 6 19:20:04.898: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state
to up
*Dec 6 19:20:05.163: Logging LWAPP message to 255.255.255.255.
*Dec 6 19:20:05.206: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host
255.255.255.255 started - CLI initiated
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
