Hi, I believe you are looking for
neighbor x.x.x.x local-as 345 no-prepend replace-as --- On Tue, 7/10/12, Aaron <[email protected]> wrote: > From: Aaron <[email protected]> > Subject: [c-nsp] bgp as pe ce > To: [email protected] > Date: Tuesday, July 10, 2012, 1:24 PM > When I advertise 1.3.9.0/24 to my ISP > they are seeing the as-path as.. 345 > 64512 > > > > How do I get rid of 64512 so it's not sent as part of the > as-path ? > > > > My intentions were to use 64512 as my internal As that I use > to run bgp > between all my pe's for my internal mpls l3vpn's... > > > > router bgp 64512 > > bgp router-id 10.10.0.10 > > address-family vpnv4 unicast > > ! > > neighbor 10.101.12.253 > > remote-as 64512 > > update-source Loopback0 > > address-family vpnv4 unicast > > ! > > ! > > vrf one > > rd 10.10.0.10:1 > > address-family ipv4 unicast > > maximum-paths ibgp 2 unequal-cost > > network 1.3.9.0/24 > > > > neighbor 1.2.3.4 > > remote-as 789 > > local-as 345 > > address-family ipv4 unicast > > route-policy ipv4-allow-in in > > route-policy ipv4-allow-out out > > > > I also tried the two ways of removing private AS and > this didn't work. > > > > neighbor 1.2.3.4 > > remote-as 789 > > local-as 345 > > address-family ipv4 unicast > > route-policy ipv4-allow-in in > > route-policy ipv4-allow-out out > > remove-private-AS entire-aspath > > > > didn't work > > > > neighbor 1.2.3.4 > > remote-as 789 > > local-as 345 > > address-family ipv4 unicast > > route-policy ipv4-allow-in in > > route-policy ipv4-allow-out out > > remove-private-AS > > > > didn't work > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
