Thanks everyone for your help.
We found that the ASR still refused to cooperate after we verified the
interface and global commands listed below, were in use.
We then tried an Integra SFP that declares itself to be a Cisco in the
PID. Good to go!
NAME: "module mau GigabitEthernet0/2/CPU0/1", DESCR: "Cisco CWDM SFP
1530 nm; Gigabit Ethernet and 1G/2G FC"
PID: CWDM-SFP-1530 , VID: V02 , SN: EOSC4J60159
On 7/18/2012 10:03 PM, Xu Hu wrote:
I remember usually I just type the global command, then it works.
Thanks and regards,
Xu Hu
On 19 Jul, 2012, at 9:48, Matt Addison<[email protected]> wrote:
transceiver permit pid all
On the interface
And
service unsupported-transceiver
In global.
Sent from my iPad
On Jul 18, 2012, at 21:18, Xu Hu<[email protected]> wrote:
Try to search one command to type into Cisco equipment, by default cannot
recognise the third party transceiver.
Thanks and regards,
Xu Hu
On 19 Jul, 2012, at 4:41, TomTom40502<[email protected]> wrote:
Anyone else having issues with Vertex CWDM SFPs not functioning on the 20x1GE
in a MOD80-TR running asr9k-os-mbi-4.0.1?
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
