Hi Gert and Saku, Thanks for everything, it took a night of little sleep and getting up this morning reading both of your replies for me to go "Joe your an idiot" and understand what I should have from the previous emails. LOL
Very cool, I appreciate everything. Hope you have a great day/evening. Joe On Mon, Jul 30, 2012 at 3:13 AM, Gert Doering <[email protected]> wrote: > Hi, > > On Sun, Jul 29, 2012 at 10:15:12PM -0400, Joseph Hardeman wrote: > > I ran the command Saku gave and it is showing the operating mode : > PFC3BXL, > > which I assume means that the CFC card is not bringing the SUP Engine > down > > any and it is operating in normal PFC3BXL mode. Which should mean we get > > around, if understand Saku's calculations correctly, then the engine > should > > be passing around 32Mpps from this card to the SUP engine. > > > > Do you know of any specific commands that I should run to help me make > sure > > that the hardware is running properly and the Line Card hasn't caused the > > Engine to fall down to a B or A mode? > > As we both said, there is nothing in a CFC card that *could* cause that. > > The point is: if you have a *D*FC, it needs to operate the same as the > system's PFC - and if the DFC is less capable (like: DFC is 3B, PFC is > 3C-XL) the system will fall down to the lowest common denominator (like: > 3B). > > This will not ever happen with CFC cards, so there is nothing to worry > about - but if you still do: the command you used is the command used > to check system operation mode. > > gert > -- > USENET is *not* the non-clickable part of WWW! > // > www.muc.de/~gert/ <http://www.muc.de/%7Egert/> > Gert Doering - Munich, Germany > [email protected] > fax: +49-89-35655025 > [email protected] > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
