Its working now , Thanks Walter BR, Mohammad
From: [email protected] To: [email protected] CC: [email protected]; [email protected] Subject: RE: [c-nsp] GNS3 Multiple Instances Date: Tue, 7 Aug 2012 02:18:22 +0300 Hi all , i copied the file twice other than the two files The first file autostart = False [localhost:7201] workingdir = working udp = 10201 [[3725]] disk0 = 64 image = /root/Desktop/INE/c3725-adventerprisek9-mz.124-18.bin ram = 128 ghostios = True sparsemem = True [[ROUTER R1]] model = 3725 console = 2001 cnfg = R1.cfg f0/0 = R2 f0/0 [[ROUTER R2]] model = 3725 console = 2002 cnfg = R2.cfg f0/0 = R1 f0/0 [GNS3-DATA] configs = initial.configs workdir = working The second file autostart = False [localhost:7202] workingdir = working udp = 10201 [[3725]] disk0 = 64 image = /root/Desktop/INE/c3725-adventerprisek9-mz.124-18.bin ram = 128 ghostios = True sparsemem = True [[ROUTER R3]] model = 3725 console = 2003 cnfg = R3.cfg f0/0 = R4 f0/0 [[ROUTER R4]] model = 3725 console = 2004 cnfg = R4.cfg f0/0 = R3 f0/0 [GNS3-DATA] configs = initial.configs workdir = working And still did not work BR, Mohammad Date: Mon, 6 Aug 2012 07:58:59 -0700 From: [email protected] To: [email protected] CC: [email protected]; [email protected] Subject: Re: [c-nsp] GNS3 Multiple Instances The example Jeffery had should work, just like this example: http://www.cciezone.com/?p=111 However your files have the same port number for both hypervisors. You MUST give them different port numbers. (ie: localhost:7202 for the first one,and localhost:7203 for the second perhaps) you also have to change the udp command. It is the beginning of where it will allocate ports for each hypervisor, they have to differ as well. For example "udp = 10201 " for the first one, and "udp = 10501" for the second one should give them good enough separation that you likely won't have to worry about overlap. From: "Mohammad Khalil" <[email protected]> To: [email protected] Cc: [email protected] Sent: Saturday, August 4, 2012 11:10:10 AM Subject: Re: [c-nsp] GNS3 Multiple Instances No , I have tried that before , even with determining the UDP port numbers , please check my files autostart = False [localhost:7202] workingdir = working udp = 10201 [[3725]] disk0 = 64 image = /root/Desktop/INE/c3725-adventerprisek9-mz.124-18.bin ram = 128 ghostios = True sparsemem = True [[ROUTER R3]] model = 3725 console = 2003 cnfg = R3.cfg f0/0 = R4 f0/0 [[ROUTER R4]] model = 3725 console = 2004 cnfg = R4.cfg f0/0 = R3 f0/0 [GNS3-DATA] configs = initial.configs workdir = working autostart = False [localhost:7202] workingdir = working udp = 10201 [[3725]] disk0 = 64 image = /root/Desktop/INE/c3725-adventerprisek9-mz.124-18.bin ram = 128 ghostios = True sparsemem = True [[ROUTER R3]] model = 3725 console = 2003 cnfg = R3.cfg f0/0 = R4 f0/0 [[ROUTER R4]] model = 3725 console = 2004 cnfg = R4.cfg f0/0 = R3 f0/0 [GNS3-DATA] configs = initial.configs workdir = working BR, Mohammad > From: [email protected] > Date: Fri, 3 Aug 2012 22:54:47 -0500 > Subject: Re: [c-nsp] GNS3 Multiple Instances > To: [email protected] > CC: [email protected] > > Sure, just run multiple instances of the hypervisor... Example is > running 3; 7200, 7201, 7202. > > [ec2-50-16-114-152.compute-1.amazonaws.com:7200] > [[ROUTER R1]] > console = 2001 > aux = 2501 > slot0 = C7200-IO-FE > f0/0 = SW1 1 > slot1 = PA-2FE-TX > f1/0 = SW2 1 > slot2 = PA-4T+ > s2/0 = R7 s2/0 > x = -109.828233696 > y = -426.765438603 > z = 1.0 > [[ROUTER R2]] > console = 2002 > aux = 2502 > slot0 = C7200-IO-FE > f0/0 = SW1 2 > slot1 = PA-2FE-TX > f1/0 = SW2 2 > slot2 = PA-4T+ > s2/0 = R8 s2/0 > x = -358.12969685 > y = -378.325537855 > z = 1.0 > [ec2-50-16-114-152.compute-1.amazonaws.com:7201] > [[ROUTER R4]] > console = 2004 > aux = 2504 > slot0 = C7200-IO-FE > f0/0 = SW1 4 > slot1 = PA-2FE-TX > f1/0 = SW2 4 > x = 205.0 > y = -23.0 > z = 1.0 > [[ROUTER R3]] > console = 2003 > aux = 2503 > slot0 = C7200-IO-FE > f0/0 = SW1 3 > slot1 = PA-2FE-TX > f1/0 = SW2 3 > x = 168.0 > y = -166.0 > z = 1.0 > [ec2-50-16-114-152.compute-1.amazonaws.com:7202] > [[ROUTER R5]] > console = 2005 > aux = 2505 > slot0 = C7200-IO-FE > f0/0 = SW1 5 > slot1 = PA-2FE-TX > f1/0 = SW2 5 > x = -102.0 > y = 12.0 > z = 1.0 > [[ROUTER R6]] > console = 2006 > aux = 2506 > slot0 = C7200-IO-FE > f0/0 = SW1 6 > slot1 = PA-2FE-TX > f1/0 = SW2 6 > x = -381.960372945 > y = -33.0 > z = 1.0 > > On Fri, Aug 3, 2012 at 4:59 PM, Mohammad Khalil <[email protected]> wrote: > > > > Hi all , I know this is a Cisco forums but GNS3 is the simulation we mostly > > work on , I asked on GNS3 forums but did not find an answer > > I want to run multiple instances of GNS3 on the same server , is that > > doable? > > > > BR, > > Mohammad > > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
