on 4900M
! int vlan NNN counter ! did help (yes i know the 4900M ist not a "metro" switch) Mit freundlichen Gru?en Kind regards Veuillez agreer mes salutations distinguees Met vriendelijke groet Juergen. > Try to set the load-interval to 30s, then check again. > Xu Hu > > On 8 Aug, 2012, at 21:54, "Aaron" <[email protected]> wrote: > > anybody know why me3600 svi doesn't seem to show in and out > bit counts that > > the underlying phy int shows? ....all svi's (10,11,13) are > in a vrf running > > over mpls l3vpn > > > > 3600#sh int vl 10 | in 30 sec > > 30 second input rate 2000 bits/sec, 3 packets/sec > > 30 second output rate 1000 bits/sec, 3 packets/sec > > > > 3600#sh int g0/1 | in 30 sec > > 30 second input rate 402000 bits/sec, 359 packets/sec > > 30 second output rate 6157000 bits/sec, 613 packets/sec [...] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
