Ok Tim, now i have RD configured.
by using ip vrf receive VTC, i have that address belonging to global routing table and to VTC routing table. I need these route/addresses let communicate between them. I think something is going wrong, because the ping doesn't work. I read an access-list is mandatory to specify "when" treat the network as a network inside the vrf. But if i delete access-list 100, i can ping anyway. Any idea to how to allow a vlan not belonging a VRF to communicate inside the VRF and viceversa ? 2012/8/9 Tim Franklin <[email protected]>: >> I know RD and route-target are used only by BGP. > > Right, but even for "vrf-lite", Cisco still require you to assign an RD > before the VRF becomes activated. > > Regards, > Tim. -- L. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
