All: We are running a 3750 on 12.2(52)SE which terminates a 1G connection from a metro Ethernet provider so that we can aggregate customer Ethernet circuits based on vlan id and split them out on individual 100M connections.
When we enable "mls qos trust dscp" on a customer-facing interface, the switch stops forwarding traffic to our metro Ethernet provider. Our only resolution is to reload the switch to restore services. We have a Cisco TAC case open but I was curious if anyone else has experienced this issue. The command "mls qos trust dscp" is already enabled on the 1G interface with no issues. The customer-facing interface is a dot1q tunnel and "mls qos" is enabled globally. -- Devon _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
