Hi Guys, We typically get QinQ links from our upstreams for p-t-p links between
our POPs - Upstream carrier does the QinQ and we simply configure a trunk port
to them and tag whatever vlans we need. (i.e. dont need to engage upstream for
the vlans we want to use) We have a new POP, with our standard QinQ hand-off
from carrier(p-t-p link to another POP)...but we have one of our customers is
also requesting QinQ also between the two POPs(From us) - Is this possible?
Each end of the link is our equipment (2960 and a 3560) which connects to
carrier...each of these switches connect to the customers switches.....note our
switches are only doing L2 (All L3 is done on 7200's) Cheers.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
