On 17/08/12 15:29, John Neiberger wrote:
> Can you be more specific here? >Where would you shape?
I was wondering if an outbound shaping policy on the 1g links would
smooth out the peaks of those bursts prior to them hitting the small
hardware queue. I'm just kind of thinking out loud.
Not really. Shaping happens at the output of the queue, so it can't help
you with the queue overflowing.
On the 6500, packets are
1. received
2. put into an ingress queue
3. forwarding lookup takes place
4. packets are moved across the fabric into an egress queue
5. egress queueing takes place
Steps 1-3 don't really "block" because the fabric is non-blocking. So
the ingress queueing is largely useless on this platform. So, your only
room for dealing with output speed/load mismatches is in the egress queue.
You'd need to ingress shape (which is not possible) or egress shape on
the upstream box. And shaping is not widely available.
TBH, you either need a box with much bigger buffers, or move to a 10g port.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
