Just turn on v2, v4 and v6 will require distinct id's. When you first turn on v2 on a single router, the two will stop talking so be prepared for the outage on v4.
David -- http://dcp.dcptech.com -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Gmail Sent: Friday, August 17, 2012 8:33 PM To: Nsp Subject: [c-nsp] HSRPv1 and HSRPv2 Hi Experts, Understood that such question need to real test in the lab, but don't have same series equipment so far, so... Does anybody have any experience to configure the HSRPv1 and HSRPv2 in 7609, the thing is the current network just deploy IPv4 service, running some sub-interface with HSRPv1, now we want to load the IPv6 service with dual-stack for such interfaces. My question is can we just use the same sub-interface which combine HSRPv1 and HSRPv2 service? Or we must use new different sub-interface? Or new physical interface? Thanks and regards, HuXu Sent from my iPad _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
