Hi Guys, Is it possible for 1841 port numbering to "change"? example - 1841
with 2 onboard FE's + FE WIC Would be FA0/0 (Onboard)FA0/1 (Onboard)FA0/0/0
(FE WIC) We have been told that a replacement 1841 that went to site(Same
config as previous 1841), FA0/1 and FA0/0/0 "swapped" - I seriously doubt this
happened, and suspect eth cables were connected to incorrect ports.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
