Hi All, I have a module (16 SFM-capable 16 port 10/100/1000mb RJ45) in a 6500 chasis running IOS Version 12.1(23), giving the following errors
Aug 26 06:41:48.965: %PM_SCP-SP-6-LCP_FW_ERR_INFORM: Module 9 is experiencing t e following error: Pinnacle #0, Frames with Bad Packet CRC Error (PI_CI_S_PKTCR _ERR - 0xC7) = 1100 Aug 26 09:11:49.090: %PM_SCP-SP-6-LCP_FW_ERR_INFORM: Module 9 is experiencing t e following error: Pinnacle #0, Frames with Bad Packet CRC Error (PI_CI_S_PKTCR _ERR - 0xC7) = 983 I recently swapped out this module, the errors cleared for a while but have now started again. Any ideas appreciated. Rgds Harry Harry Hambi BEng(Hons) MIET Rsgb http://www.bbc.co.uk/ This e-mail (and any attachments) is confidential and may contain personal views which are not the views of the BBC unless specifically stated. If you have received it in error, please delete it from your system. Do not use, copy or disclose the information in any way nor act in reliance on it and notify the sender immediately. Please note that the BBC monitors e-mails sent or received. Further communication will signify your consent to this. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
