Nm-1atm-25 has been eol/eos since 2006, my boss totally doesn't like the idea of rolling out ~40 node locations with atm25 backhual with eos/eol gear!
This may have answered it for me J I'll still hear from any suggestions yall have though, just incase we do it. Aaron From: Aaron [mailto:[email protected]] Sent: Friday, August 31, 2012 11:05 AM To: [email protected] Subject: catv network - qpsk - atm25 My boss is asking me about reeng our catv network for various reasons. (swrd replacement, do rfog for a different set box, much of which I don't understand since it's very catv-speak..but I'm the ip eng that he needs to speak to some of this below) He is saying that one of the pieces of catv gear (qpsk demodulator) has an ATM25 interface on it that might need to get backhauled into our video Headend. Anybody know about carrying atm25 over an Ethernet/mpls/ip network? I'm thinking AToM or something.. I'm seeing cisco 1400 or 2600 or 3600 support atm25 interfaces. (btw, the catv atm 25 int is rj45 with probably a atm compliant underlying signaling, etc) If I went via atm25 router into my mpls cloud I could l2/l3vpn that into my video headend and probably be done with it. Lemme know your thoughts plz Aaron _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
