Everything seems to be ok. The ce's are all 3750's. One thing though, is there a reason why ce 3750 which is off of pe1 (me3600) sees itself as a cdp neighbor ?
All 3750's see the other 2 remote 3750's as cdp neighbors, except for ce off of me3600 ALSO see itself. Aaron PE1 (me3600) noc-3600#sh run | sec l2 vfi l2 vfi tls-test manual vpn id 1 neighbor 10.101.0.4 20000 encapsulation mpls neighbor 10.101.0.3 20000 encapsulation mpls noc-3600#sh run in vl 1000 interface Vlan1000 no ip address xconnect vfi tls-test noc-3600#sh run in g0/23 interface GigabitEthernet0/23 description c7 tls-test switchport trunk allowed vlan none switchport mode trunk load-interval 30 service instance 1 ethernet encapsulation untagged , dot1q 1-4094 l2protocol tunnel bridge-domain 1000 PE2 (asr9k) RP/0/RSP0/CPU0:1-9k#sh run l2vpn br gr tls-test l2vpn bridge group tls-test bridge-domain tls-test interface GigabitEthernet0/0/0/9.116 neighbor 10.101.0.4 pw-id 20000 neighbor 10.101.12.253 pw-id 20000 RP/0/RSP0/CPU0:1-9k#sh run in g0/0/0/9 interface GigabitEthernet0/0/0/9 description tls-test RP/0/RSP0/CPU0:1-9k#sh run in g0/0/0/9.116 interface GigabitEthernet0/0/0/9.116 l2transport description c7 tls-test encapsulation dot1q 1-4094 , untagged l2protocol cpsv tunnel PE3 (asr9k) RP/0/RSP0/CPU0:2-9k#sh run l2vpn br gr tls-test l2vpn bridge group tls-test bridge-domain tls-test interface GigabitEthernet0/1/0/15.116 neighbor 10.101.0.3 pw-id 20000 neighbor 10.101.12.253 pw-id 20000 RP/0/RSP0/CPU0:2-9k#sh run in g0/1/0/15 interface GigabitEthernet0/1/0/15 description tls-test to training room 3750 smvy hq bldg negotiation auto RP/0/RSP0/CPU0:2-9k#sh run in g0/1/0/15.116 interface GigabitEthernet0/1/0/15.116 l2transport description c7 tls-test encapsulation dot1q 1-4094 , untagged l2protocol cpsv tunnel _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
