Thanks for the information, Anyone graphing the ESP / RP cpu any hint for the OID .
Regards, Ragu I think following links havinging good information , https://supportforums.cisco.com/thread/2133112 http://www.cisco.com/en/US/products/ps9343/products_tech_note09186a0080af2d14.shtml On Wed, Sep 26, 2012 at 2:37 PM, Tassos Chatzithomaoglou < [email protected]> wrote: > Use the following to get a better idea. > > *show platform software status control-processor brief > * > > > -- > Tassos > > > On 26/9/2012 10:51 ??, Nick Hilliard wrote: > >> On 26/09/2012 10:01, ibogzipper iboge wrote: >> >>> is it normal to have 1% cpu with 800 Mbps duplex ? just pure routing & >>> QOS >>> . is there any other OID's we can monitor ? >>> >> the asr1k is a hardware forwarding platform. In practice this means that >> the forwarding mechanism on the router is separate to the management >> mechanism. When you type in "show cpu", you're requesting information >> about the management CPU which plays no part in shifting traffic through >> the box. >> >> So yes, 1% cpu with 800mbit traffic sounds fine. >> >> Nick >> >> ______________________________**_________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/**mailman/listinfo/cisco-nsp<https://puck.nether.net/mailman/listinfo/cisco-nsp> >> archive at >> http://puck.nether.net/**pipermail/cisco-nsp/<http://puck.nether.net/pipermail/cisco-nsp/> >> >> > ______________________________**_________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/**mailman/listinfo/cisco-nsp<https://puck.nether.net/mailman/listinfo/cisco-nsp> > archive at > http://puck.nether.net/**pipermail/cisco-nsp/<http://puck.nether.net/pipermail/cisco-nsp/> > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
