I have 15.2(4)S on my me3600x so I'm ready to test 6vpe.
I'm seeing that there isn't really a way to enable ipv6 under the regular vrf definition "ip vrf one" syntax.. But I do see that "vrf definition one" has address-family v4 and v6 under it.. I didn't know how to migrate vrf structures of "ip vrf one" to "vrf definition one" so I just went at it to see how smoothly I could make this happen. someone please tell me if there was a better way or if anything I mentioned is misunderstood on my part. *** again, the premise here was a wanted to do 6vpe on this me3600x PE..so I was under the impression that I had to use "vrf definition one" in order to make vrf "one" ipv6 aware... so I proceeded to remove "ip vrf one" and recreate it under the "vrf def one" syntax. *** WAIT FOR VRF TO DELETE....do sh vrf one "being deleted"...wait... *** interface vrf command changed ------ old - "ip vrf forwarding one" ------ new - "vrf forwarding one" *** you gotta add mp-ibgp vrf-specific structure back in Conf t no ip vrf one vrf d one rd 10.101.12.253:1 address-family ipv4 route-target export 1:1 route-target import 1:1 interface Vlan10 vrf forwarding one ip address 10.40.4.1 255.255.255.0 secondary ip address 1.2.3.4 255.255.255.240 ip access-group coming-from-dhcp-customers in ip access-group going-to-dhcp-customers out ip helper-address 192.168.254.136 interface Vlan11 vrf forwarding one ip address 10.40.5.1 255.255.255.0 ip helper-address 192.168.254.136 router bgp 64512 address-family ipv4 vrf one redistribute connected maximum-paths ibgp unequal-cost 3 do wr Aaron _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
