If you talk about traps, they don't send ifAlias. We write script which do additional snmpwalk based on ifIndex to findout ifAlias and then send trap with this info.
On 03.10.2012 0:15, Michael Sprouffske wrote: > this is what I get > > snmpTrapOID.0 = snmpTraps.3 > ifIndex.10005 = 10005 > ifDescr.10005 = FastEthernet0/5 > ifType.10005 = 6 > > > > > > ________________________________ > From: Nikolay Shopik <[email protected]> > To: [email protected] > Sent: Tuesday, October 2, 2012 1:11 PM > Subject: Re: [c-nsp] cisco 2960 snmp interface description > > If you have default snmp config on 2960, there nothing additional need > to pass interface names. Its in ifAlias not in ifDescr > > On 02.10.2012 23:46, Michael Sprouffske wrote: >> What needs to be done in order for the switch to pass the descriptions of >> the interfaces. I looked at a debug and the switch is only sending the >> physical interface name and not the description. I did a walk on the device >> and was able to pull this information. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
