Hi I have a ASR 1001-F. Is there a cmd or mib so I can plot the current throughput (to see if I need to upgrade to 5G license)
LAB#show platform hardware throughput level The current throughput level is 2500000 kb/s What about the ESP load, the following command doesn't show me the ESP load, on a 1001-F (15.1) Is this a platform issue or a sw issue (the command works on a 1006) LAB#show platform software status control-processor RP0: online, statistics updated 9 seconds ago Load Average: healthy 1-Min: 0.07, status: healthy, under 8.00 5-Min: 0.04, status: healthy, under 8.00 15-Min: 0.00, status: healthy, under 10.00 Memory (kb): healthy Total: 3944844 Used: 3005656 (76%) Free: 939188 (24%) Committed: 2743956 (70%), status: healthy, under 300% Per-core Statistics CPU0: CPU Utilization (percentage of time spent) User: 1.30, System: 0.90, Nice: 0.00, Idle: 97.80 IRQ: 0.00, SIRQ: 0.00, IOwait: 0.00 CPU1: CPU Utilization (percentage of time spent) User: 1.00, System: 1.20, Nice: 0.00, Idle: 97.70 IRQ: 0.10, SIRQ: 0.00, IOwait: 0.00 Regards MKS _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
