On 05.11.2012 19:40, Darren O'Connor wrote:
All.
Is it possible to change the subinterface MTU to be different than another
subinterface on the same physical port? I've got no problem doing this on my
Brocade XMR kit. The Cisco always pulls the MTU form the physical interface and
I've found no way to have a different one.
You can configure the IP MTU for the interface and/or subinterfaces ...
just like you can configure MPLS MTU, etc ... should do what you need
... just make sure the physical MTU is set large enough (IOS will ensure
you can't exceed the physical interface's MTU)
-garry
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
