On 11/15/2012 08:25 PM, Craig Horchem wrote:
I am having some issues with two SUP720's and can't find any record of any previous mention of something like this....
00:01:04: %SYS-6-BOOTTIME: Time taken to reboot after reload = 1211376 seconds
Either this box has been powered off forever, or the battery on the sup is dead and the HW clock is out.
*00:00:47: SP: tyfib_tcam_init: Unsupported board -- 0*
So it doesn't like something about the hardware, which is unsurprising given the next item...
00:00:51: SP: SP: Currently running ROMMON from S (Gold) region 00:01:03: %SYS-SP-5-RESTART: System restarted -- Cisco Internetwork Operating System Software IOS (tm) s72033_sp Software (s72033_sp-SPV-M), Version 12.2(17d)SXB11a, RELEASE SOFTWARE (fc1)
That software release is *ancient*. Upgrade. Seriously.
**00:01:12: SP: fabman: get IDPROM image error 3** **00:01:12: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 3, power not allowed:** ** C2PLUS module is not supported without SFM.** **00:01:12: %SM-SP-4-BADEVENT: Event 'c2plus_disallowed_power' is invalid for the current state
etc. etc. this all looks like you've got too-new modules in a chassis running ancient IOS. Upgrade it. Maybe it has lost the boot: string because the CMOS battery has died, and you were expecting newer firmware to load?
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
