Hi,
We are provided a QinQ service from a carrier - Each customer tail is a vlan
chosen by us(we inform the carrier of the vlan), which we place into L3 dot1q
Int, and then trunk to the Carrier Agg(carrier connecting port is QinQ.)
Would the carrier have a single outer tag configured for all our customer tails?
i.e.
Carrier outer tag vlan 100
Customer Site A vlan 200Customer Site B vlan 300Customer Site C vlan 400
We trunk vlans 200,300+400 to carrier carrier configured QinQ port (Outer tag
vlan 100)
Each customer site, the carrier installs an NTU, which I assume they configure
an access port on the LAN side with the appropriate vlan, and then the WAN side
of the NTU would be a trunk(allowing that vlan) which would connect to the
carriers core where the connecting port would be configured as QinQ with outer
tag vlan 100?
Would the carrier do this for every one of our client sites (i.e. Use outer tag
vlan 100 on all ports on the core connecting to there NTU's at our customer
sites?)
Thanks in advance
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
