The command should be under the IPv4 address family... Router(config)#vrf definition test
Router(config-vrf)#address-family ipv4 Router(config-vrf-af)#md Router(config-vrf-af)#mdt ? data MDT data trees default The default group log-reuse Event logging for data MDT reuse overlay MDT Overlay Protocol preference MDT preference (default pim mldp) Arie -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Phil Mayers Sent: Monday, November 19, 2012 14:50 To: [email protected] Subject: [c-nsp] 15.1SY & draft-rosen MVPN It's late and I'm tired, so maybe I'm missing something, but after a reload into 15.1SY, our testing sup270 failed to take the "mdt" commands under VRFs: mdt default 239.254.1.2 ^ % Invalid input detected at '^' marker. The VRFs are all "new" format "vrf definition" if that matters, but an old-style "ip vrf" object doesn't take the command either. There's a bunch of stuff in the config guide about mLDP-based MVPNs and some new "l3vpn encap" command stuff: http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/15.1SY/config_guide/sup720/ipv4_multicast_vpn.html Any ideas anyone? Bug? Cheers, Phil _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
