On 27/11/12 16:21, Robert Williams wrote:
Hi All,
Just experienced a load of these on one of our 6500/Sup-7203BXL
units:
I've seen those occasionally. We reliably get them just after a reload.
I think they're often cosmetic.
So we’ve never had this before (we have a lot of these in service)
and I’m just curious what thoughts anyone has. Standard documentation
says to upgrade IOS and/or log with TAC.
It’s running 12.2(33)SXJ3 so we can upgrade to SXJ4, which was
recently marked as a ‘safe’ release. I’m curious though if people
think this is likely to be hardware related or a software bug. Again,
documentation suggests a software issue, but to have suddenly seen it
on one chassis without warning I’m a little sceptical. It’s still
performing fine and I’d rather not waste a reload if it’s unlikely to
actually fix anything. Only related events were a couple of 3rd party
IPv6 BGP sessions reset about 1 minute prior to the most recent
events. Not sure if that can be related though, but worth
mentioning.
I think it's probably a code bug that triggers a protective/cosmetic
error. We've never had any problems ignoring them - on this platform, at
least. Maybe different on others.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
