Hi Folks, Below is my IPv6 configurations about MQC: ipv6 access-list FTPV6 permit tcp any any eq ftp class-map match-all FTPV6 match access-group name FTPV6 policy-map test class FTPV6 set dscp cs7
interface TenGigabitEthernet9/1 ip address 2.2.2.254 255.255.255.0 load-interval 30 ipv6 address 2002::254/64 service-policy input test STC-----7609------STC Sending the traffic from STC port 1/1 to ten9/1 in 7609 ES+ 20G line card, receiving traffic in STC port 1/2 through interface ten 9/1 in 7609 ES-20G line card. Traffic sent from STC is TCP traffic. Now the issue is IPv6 traffic cannot match through checking command "show policy-map inter ten 9/1", even the class-default also don't have. Do i miss any configurations, or miss understanding anything? Will appreciate for any inputs. Thanks and regards, Hu Xu _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
