Hi Toth, i've check all no counter error on the interace, i've checked again
Host A#ping mpls ipv4 x.x.x.x/32 repeat 1000 the result is smooth no packet drop but when i cek with this Host A#ping x.x.x.x repeat 1000 always have packet drop the path is same and there is no error counting on interface Thanks, Nanda On Sun, Dec 9, 2012 at 3:40 AM, Tóth András <[email protected]> wrote: > Hi Nanda, > > Maybe you have multiple paths between the source and destination? Like > etherchannel or Layer-3 ECMP (route with multiple nexthops on different > links)? That would explain this, possibly the MPLS ping and ping to > Loopback is taking one link, while the previous ping vrf takes a different > one and that link might have some errors on it. > > I'd suggest to check the following commands along the path on all possible > physical interfaces both inbound and outbound. > sh interface <x/y> > sh int <x/y> counters error > sh counters error > sh interface <x/y> transceiver detail > sh platform port-asic stats drop <int x/y> (this only works on the 3750) > > Best regards, > Andras > > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
