Sorry ignore my last, I had the documentation for 15M open, this box is running 12SX and that doesn't support it, typically.
If anyone has any other suggestions or alternative ideas then do let me know - cheers! Robert Williams Custodian Data Centre Email: [email protected] http://www.CustodianDC.com Robert Williams Backline / Operations Team Custodian DataCentre tel: +44 (0)1622 230382 email: [email protected] http://www.custodiandc.com/disclaimer.txt -----Original Message----- From: Robert Williams Sent: 16 December 2012 15:27 To: [email protected] Subject: RE: [c-nsp] All multicast punting to CPU on 6500 Hi, I've now tried the MAC filtering at the CoPP level. Cisco documentation says "MAC-based matching is done in software only" - which is slightly better than allowing the CPU to process it unnecessarily (correct me if I'm wrong there?). So to attempt to catch the traffic at the Software CoPP level I've setup a very basic class: mac access-list extended CoPP-MC-MAC permit any 0100.5e00.0000 0000.00ff.ffff class-map match-any CoPP-MC-MAC match access-group name CoPP-MC-MAC policy-map CoPP class CoPP-MC-MAC police 32000 4470 4470 conform-action transmit exceed-action drop It applies without error, however, I'm not getting any matches against the policy. Clearly I'm destined to work on this all day! Any pointers welcome, cheers... _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
