> > I have configured a VTP domain and a VTP password on all the switches, > however changes to the vlan database and other VTP information are not > propagated to all the switches, or sometimes to some of the switches.
The possible reason is that some ports are in access mode though configured for trunk mode? Why could that be? ! interface GigabitEthernet0/1 switchport trunk encapsulation dot1q switchport mode trunk #sh int GigabitEthernet0/1 switchport Switchport: Enabled Administrative Mode: trunk Operational Mode: static access Administrative Trunking Encapsulation: dot1q Operational Trunking Encapsulation: native Negotiation of Trunking: On Access Mode VLAN: 1 (default) Why is the port in static access mode while it is configured as "switchport mode trunk" and has the administrative mode "trunk"? -- Victor Sudakov, VAS4-RIPE, VAS47-RIPN sip:[email protected] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
