I believe nprobe's proxy mode should do what you want Sent from some sort of iDevice.
On 28/12/2012, at 2:19 PM, Mark Tees <[email protected]> wrote: > You can also use a tool like nprobe to add in the AS data and push it on > > Sent from some sort of iDevice. > > On 28/12/2012, at 1:57 PM, Jason Lixfeld <[email protected]> wrote: > >> It's been a while since I've played with netflow, but back in the olden >> days, I seem to remember srcas and dstas were pretty useful. I'd use that >> to figure where my traffic was going and figure out what IX I should pull to >> or what upstream I should buy from. >> >> Now in the ASR9K/v9/IPFIX days, it seem that Cisco has done something silly >> and turned off bgpSourceAsNumber (16)/bgpDestinationAsNumber (17) fields in >> favor of bgpNextAdjacentAsNumber (128) and bgpPrevAdjacentAsNumber (129). >> Pretty much rendering any sort of decent traffic engineering useless. >> >> What are folks doing to workaround this? The only thing I can see is >> something like pmacct that can correlate real-time BGP data to get >> source/destination AS. as-stats looked interesting, but it's v8 only. >> >> Any advice? >> >> Thanks in advance. >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
