Hello, After wading through hours of pages on Cisco's site I was not able to determine if the following configuration will work without having to upgrade either the DFC or the IOS. We have some switches that I need to install some 10G ports in. I have some WS-X6704-10GE blades with 3BXL DFC boards on them. I don't have a chassis to test with, and don't want to ship these out to have them installed if they are not going to work. The chassis have SUP720-3BXL's in them and are running s72033-advipservicesk9_wan-mz.122-33.SXH. Aside from the fact that the IOS is older, does anyone see any issues with this IOS and SUP working with the WS-X6704-10GE?
Thanks, Lee _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
