Добрый день, SW-Core is a CISCO 4900M switch
>> Ensure identical MST configuration with name and revsion (textual identical on all switches helps a lot) We have not this parameter in configuration because we use only one MSTI Does it that strongly recommended to enable this options? We will attempt enable UDLD aggressive, after that i will write about results if they will be. Thanks a lot 2013/1/10 <[email protected]> > > If your sw-core is HP than I would tell you "enable spanning-tree" it's > off by default.**** > > Filter -Y see above**** > > Wll show spannint-tree tell you that running stp version IS MST ?**** > > (you can have mst config and pvrstp running,**** > > Show mst config will shot it even when pvst is active.)**** > > ** ** > > So what Switches do you use?**** > > Ensure identical MST configuration with name and revsion (textual > identical on all switches helps a lot)**** > > And that all your switches have STP/MST running.**** > > Having WAN links with carrier-CPE'S/NT's ensure sufficient MTU and > forwarding of BPDU's **** > > (and packet with destination-MAC=local-special-MAC-Address)**** > > Enable UDLD aggressive to find one-way links and disable them.**** > > ** ** > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
