Hi, I am trying to use Cisco ASR1002 for broadband services,
when I debug PPP authentication I receive "*Jan 11 07:58:47.071: ppp86 PPP: Using vpn set call direction *Jan 11 07:58:47.071: ppp86 PPP: Treating connection as a callin *Jan 11 07:58:47.071: ppp86 PPP: Session handle[BD000045] Session id[86] *Jan 11 07:58:47.113: ppp86 PAP: I AUTH-REQ id 223 len 24 from "adslteam" *Jan 11 07:58:47.113: ppp86 PAP: Authenticating peer adslteam *Jan 11 07:58:47.114: ppp86 PPP: Sent PAP LOGIN Request *Jan 11 07:58:47.143: ppp86 PPP: Received LOGIN Response PASS *Jan 11 07:58:47.152: ppp86 PAP: O AUTH-NAK id 223 len 27 msg is "Authentication failure" " and here is the configuration. aaa group server radius TEST server-private 10.10.10.17 auth-port 1812 acct-port 1813 key ****** ! aaa authentication login default local aaa authentication ppp TEST group TEST aaa authentication ppp callin group TEST aaa authorization network TEST group TEST aaa accounting exec TEST start-stop group TEST aaa accounting network TEST start-stop group TEST bba-group pppoe TEST virtual-template 1 sessions per-vlan throttle 1 10 50 interface GigabitEthernet0/0/1 no ip address negotiation auto pppoe enable group TEST ! interface Virtual-Template1 ip unnumbered Loopback1 ip tcp adjust-mss 1400 load-interval 30 no peer default ip address ppp authentication pap TEST ppp authorization TEST ppp accounting TEST ! radius-server vsa send accounting radius-server vsa send authentication Regards, John _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
