Thanks Gert.
Wish I knew what was causing issue.
But IOS upgrade will be good first step.
I appreciate it.
On 1/11/2013 2:07 PM, Gert Doering wrote:
Hi,
On Fri, Jan 11, 2013 at 02:20:33PM -0500, Adam Greene wrote:
Thinking of putting 12.2(40) on the router, which has been running fine
in a separate environment on a 7206VXR/NPE400.
Cisco states that 12.2(4)BW or 12.2(8)B or later are required for an
NPE-G1. Not sure what the B means. Do you think 12.2(40) would work?
If anyone has any other tips or suggestions, they are welcome.
All these IOS versions are ancient.
12.4(latest)-with-no-letters, or 15.0(latest)M would be my recommendation.
gert
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
