Colleagues,
Is it possible to police traffic on L2 ports? I have configured a
policy map, but "sh policy-map interface" counters are all 0 and
traffic is not being policed (which is confirmed by iperf).
Could you please refer me to the relevant documentation? Thanks a lot
in advance.
=====================
!
policy-map ITSO
description ITSO traffic
class class-default
police 2000000 8000 exceed-action drop
!
!
interface GigabitEthernet0/4
description Energy Monitoring
switchport access vlan 10
service-policy input ITSO
!
=====================
sw-parabel#sh policy-map interface gi 0/4
GigabitEthernet0/4
Service-policy input: ITSO
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
sw-parabel#
--
Victor Sudakov, VAS4-RIPE, VAS47-RIPN
sip:[email protected]
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
