Maybe. Check the output of sh diag to see what test failed, and schedule a re-run at your convenience
Harry Hambi <[email protected]> wrote: >Hi All, happy new year, the sh mod switch 2 command on a VSS pair shows >the following line > >Mod 4 Distributed Forwarding Card WS-F6700-DFC3C SAL1443X9PK 1.4 > MinFail > >The woorying bit is the status field MinFail…..is this module about to >fail?? > >Rgds >Harry > >Harry Hambi BEng(Hons) MIET Rsgb > > > >------------------------------------ >http://www.bbc.co.uk >This e-mail (and any attachments) is confidential and >may contain personal views which are not the views of the BBC unless >specifically stated. >If you have received it in >error, please delete it from your system. >Do not use, copy or disclose the >information in any way nor act in reliance on it and notify the sender >immediately. >Please note that the BBC monitors e-mails >sent or received. >Further communication will signify your consent to >this. >------------------------------------ > >_______________________________________________ >cisco-nsp mailing list [email protected] >https://puck.nether.net/mailman/listinfo/cisco-nsp >archive at http://puck.nether.net/pipermail/cisco-nsp/ -- Sent from my mobile device, please excuse brevity and typos. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
