Hi Dan, You don't need enterprise image for this, ipservices is sufficient.
More details about PoE config and support features can be found below: http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/power_over_ethernet.html Best regards, Andras On Fri, Jan 18, 2013 at 9:24 PM, Dan Benson <[email protected]> wrote: > Hello all and thanks in advance for the help on this topic. > > I have a 6500e that I want to power a few AP1250s using Enhanced Poe. > > According to a lot of documentation, I should be able to get more then > 16.8Watts from my PoE WS-X6148E-GE-45AT ge-tx blade (which says it can > support upto 30Watts). My issue is that I am yet able to get more then the > 16.8Watts on the line. I am running advipservicesk 122-33.SXJ which is > newer then the minimal SXH2, do I need to be running adventerprise? > > Thanks again for any insight on this, > > db > > > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
