Dears
I read somewhere that Interfaces in the Redundant Supervisor will
use same Mac and IP of the corresponding interface in the Active
Supervisor . in the other hand Interfaces in the Redundant Supervisor
use different port number , is there any manual config needed in case
the active fail or uplinks config will be copied automatically on the
Redundant Supervisor interfaces
Br.
BEN HAMMADI Kayssar
NOKIA SIEMENS NETWORKS
Lead Engineer -BroadBand Connectivity
JNCIE (#471), CCIP
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
