That will only hide the hops, not the labels with the hops otherwise present. I believe label display is dependent on the traceroute implementation.
-- Sent from my mobile device On 2013-02-02, at 9:56 AM, "Rati , Berikaant Jokhadze" <[email protected]> wrote: > It's appear by default , you should need to enter "no ip mpls propagate-ttl > forward" > > On 02/02/2013 06:42 PM, M K wrote: >> Hi allI was simulating the above , and end to end connectivity between >> customers sites is achieved My concern is when i trace from a customer site >> to the other there should not be labels appear , am i right ? >> Thanks >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
