As far as I remember when the hitcount for the particular VMR is not 0, it will get an arrow.
Andras On Wed, Feb 13, 2013 at 6:29 AM, John Neiberger <[email protected]>wrote: > I was looking through the output of "show tcam interface <interface> acl > out ip detail" and I'm wondering what arrows at the end of the lines mean. > Most lines don't have them, but occasional entries do have them. > > V 10172 0.0.0.0 0.0.0.0 P=0 P=0 > ------ 0 ---- 0 192 -- C-- 0-0 <- > M 10178 0.0.0.0 0.0.0.0 0 0 > ------ 0 ---- 0 252 <- > R rslt: PERMIT_RESULT (*) rtr_rslt: PERMIT_RESULT > (*) hit_cnt=4521 <- > > V 10173 0.0.0.0 0.0.0.0 P=0 P=0 > ------ 0 ---- 0 136 -- C-- 0-0 > M 10178 0.0.0.0 0.0.0.0 0 0 > ------ 0 ---- 0 252 > R rslt: PERMIT_RESULT (*) rtr_rslt: PERMIT_RESULT > (*) hit_cnt=0 > > Any idea what those indicate? > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
