Hello, I am trying to configure VACL capture on switch WS-C3750X-24T-L (IOS Code – c3750e-universalk9-mz.150-1.SE2.bin).
ip access-list extended IDS permit ip any any ! vlan access-map IDS-map *action forward capture <<< not available* match ip address IDS vlan filter IDS-map vlan-list 100 ! interface Gi1/0/3 description IDS-Monitor-Port *switchport capture <<< not available switchport capture allowed vlan 100 <<< not available* Please advice if this is a IOS code issue or these commands are not at all supported on this switch model. Thanks in advance. Regards, Amolak _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
