Hi Guys,
Followed this guide
(http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_24829.html)
which worked (Did take a lot longer than expected though!), and it states that
config-register must be set to 0x2102 - Post upgrade, it doesnt mention that
you have to change it back to what it was originally - Is it necessary to
change it back?
Cheers
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
