OK, it's working for me now with GLBP under SXI4a. Specified different group number and used link-local fe80::1.
Thanks again everyone! -Vinny -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Abello, Vinny Sent: Thursday, February 28, 2013 1:30 PM To: [email protected] Cc: [email protected] Subject: Re: [c-nsp] HSRP/VRRP/GLBP Dual Stack on Cat6500/Sup720 3BXL? Well, in SXI4a, GLBP complains if I try and configure IPv6 in the same GLBP group number: "IPv4 address already configured" I'm not clear if I'm supposed to use a different group number or if it's just not supported. All the configuration examples I found show *just* IPv6, not a dual stack example which is what triggered my inquiry. -Vinny -----Original Message----- From: Jon Lewis [mailto:[email protected]] Sent: Thursday, February 28, 2013 1:19 PM To: Abello, Vinny Cc: [email protected] Subject: Re: [c-nsp] HSRP/VRRP/GLBP Dual Stack on Cat6500/Sup720 3BXL? On Thu, 28 Feb 2013 [email protected] wrote: > Hello, > > Is there dual stack support in any redundancy protocol (HSRP/VRRP/GLBP) > on the Catalyst 6500 with a Sup720 3BXL? If so, which protocols are > supported and beginning in what IOS releases? I haven't utilized it in v6, but SXI appears to have v6 capable HSRP and GLBP. VRRP doesn't appear to have any v6 support. ---------------------------------------------------------------------- Jon Lewis, MCP :) | I route Senior Network Engineer | therefore you are Atlantic Net | _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
