Good morning,
I would like to ask you all for some suggestions.
In my scenario there are several hundreds of remote sites and 2 central sites.
We're using IPSec VTI tunnels between the remote and central sites.
Each remote site has a primary and a backup circuit with different BW.
We were trying to figure out if there is a way to keep only 1 tunnel between
each remote and central site, while if the primary circuit goes down on a
remote site, the QoS policies are afected also on the central site VTI tunnel.
In other words, if there a way (or feature) that the central site notices that
the remote end is now using a backup link, so the VTI tunnel uses another QoS
policy effectively adapting to the new receiver BW?
With 2 tunnels per remote site, we could force each tunnel to only form itself
on a specific circuit, but we were trying to avoid getting thousands of tunnels
on the central sites.
Any input is appreciated. Thanks!
Regards,
Fernando
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
