I've found the small blade on my victorinox knife to be very effective at releasing sfps, and it has the advantage of being pretty thin along the length of it, so it's relatively easy to get under the optic.
I've never much liked the sfp form factor, and I don't like the LC connector, but you can't argue with density. I've also got a small collection of sfps that are missing bits of their release arrangements. Partially it's poorly designed sockets, but more often it's a design failure in making the release mechanism out of something that's simply too weak to ever manage to release it after being baked-in for a couple of years. Whoever thought a cast $rubbish-'metal' (or plastic) release on a GLC-T was a good idea needs their head examined. -- ian -----Original Message----- From: Nick Hilliard Sent: 08/03/2013, 22:07 To: CiscoNSP List Cc: [email protected] Subject: Re: [c-nsp] SFP-GE-T "stuck" in 4500-X On 06/03/2013 23:28, CiscoNSP List wrote: > As per the subject - I have two SFP-GE-T's that I cannot remove from a > 4500-X (If I install the same SFP's into an ASR, they can be removed > easily) > > Any suggestions on how to remove them from the 4500-X? I would use a flat-head mini-screwdriver (e.g. 2.0mm) to gently poke at the release mechanism and caress it out. Do a couple of test runs on another (e.g. asr) chassis to make sure you understand how the SFP release mechanism works first. Don't strain anything because you can break these things very easily. Nick /me looks sadly at a small selection of broken sfps in the bottom of his toolbox, caused by getting stuck in badly fitting sockets :-( _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
