On Fri, 2013-03-15 at 14:20 +0100, "Rolf Hanßen" wrote: > just tried out, all ends with: > %SPAN-5-PKTCAP_STOP: Packet capture session 1 ended after the > specified time, 0 packets captured > > edge1-dus1#sh monitor session 1 detail > Session 1 > --------- > Type : Capture Session > Description : - > Source Ports : > RX Only : None > TX Only : None > Both : None > Source VLANs : > RX Only : None > TX Only : None > Both : None
You need to specify something to capture just like for at normal SPAN session. Something like this: monitor session 2 type capture source vlan 120 both filter access-group span-test ! or maybe: monitor session 2 type capture source interface GigabitEthernet1/1 rx filter access-group span-test ! > Source/Destination Ports/vlans means the interfaces that take part in > the capturing or the interfaces used for exporting capture data (I am > missing the "any" keyword here) ? It's the interface/VLAN from which you want to capture. Data isn't exported, it's stored locally. -- Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
