Hello Devon, Kindly, find below output:
#remote command switch show bootvar BOOT variable = bootdisk:c7600s3223-advipservicesk9-mz.122-33.SRD4.bin,1; CONFIG_FILE variable does not exist BOOTLDR variable does not exist Configuration register is 0x2102 Register value is correct as i think, what do you think ? what else we can check ? Regards, Ahmed On Fri, Mar 15, 2013 at 7:43 PM, Devon True <[email protected]> wrote: > Ahmed, > > > Thanks for your quick reply. Actually IOS version is 12.2(33)SRD4, > > we will upgrade it soon. > > > > But the router didn't reload normally, we forced router to reload > > manually then it comes up and the ISO has been stored in > > sup-bootdisk. > > We had something similar and the config-register on the SP was 0x0 but > the RP was 0x2102. > > What does "remote command switch show bootvar" display? > > -- > Devon > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
