Hi Waris,
On 19.03.13 08:27 Waris Sagheer (waris) wrote:
Hi Everyone,
I have seen lot of good inputs on this mailer. I am collecting feedback for the
existing deployment challenges on the following platforms so that we can
address them.
[...]
* How are you using ME3800X/ME3600X/ME3600-24CX in your network?
At the time of writing this we are using them mostly for backhauling our
DSL/FTTH access nodes.
But also using them for directly connecting "bandwith hungry" business
customers with fibre access to the Internet in combination with
ME3400-2CS as CPE.
Therefor i'm specially interested in deployment and QoS scenarios where
to "shrink down" bandwith on ingress to somewhat below 1 Gbps (200 Mbps
up to 500 Mpbs) with class "best effort" without dropping to much packets.
* Any critical feature gaps? Please indicate the deployment scenario along
with the feature ask.
Yes, please.
Regarding with "old IPv4" deployment using DHCP locally served on the
ME3800/ME3600, the feature "authorized DHCP" (MAC authorized inside a
VRF) isn't VRF aware. At least for business customers i would like to
see this thing working.
Best Regards.
Matthias Kluth
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
