Well, I'm doing it, so I guess it can. And F2 modules must be in a VDC by themselves, so no M1 could possibly be involved.
Paul Lustgraaf [email protected] "Change is inevitable. Progress is not." Network Engineer, Iowa State University IT Services 515-294-0324 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Chris Evans Sent: Thursday, March 21, 2013 11:57 AM To: cisco-nsp Subject: [c-nsp] Fabricpath and L3 on the same line card Can anyone tell me if Cisco F2/F2e line modules can run Fabricpath and L3 (SVI's) on the same line module. Is it line rate as well or does it proxy through an ASIC burning ports, etc. Is an M1 module required? Someone has told me it cannot, but I believe it can. Are there any limitations with it? _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
